CAD renderings needed for a residential retaining wall project

---

---

Renderings needed for a residential retaining wall project. Output should be delivered in both .dwg and .pdf format. There are a total of 15 walls in the design. The walls will be constructed of Allan Block from their AB Aztec collection. We would like a rendering of each wall for our stone masons, showing length, height and width. Please note: A) Any portion that must be placed under ground should be indicated on the drawing so that we have the total height requirement in terms of the materials. B) If the wall height changes, the drawing should clear show the length of the wall at height A and the length of the wall at height B etc... so it's clear to the stone masons what the plan calls for. C) The rendering should show at what point in the length intersecting walls meet. In other words, if an east-west wall is intersected by a north south wall, this location should be indicated in the renderings of both walls. In addition to these renderings, we would also like to get a limited number of renderings of the interaction of walls. This will include 1) a lateral rendering of how walls 1,2,3,4 interact in the west. This should show the ends of those walls as if you are standing west of them looking at them to the east. 2) The same of walls 8, 9 and 10. 3) The intersection of wall A with the center cottage foundation. 4) The intersection of wall 7 with the southern cottage foundation. 5) the intersection of wall E with walls 8 and 9. This means the total number of renderings requested is 20, but the majority of these should be simple, height length and width fitting the allan block standard parameters. Please feel free to reach out with any questions. Note: the original landscape architect rendering I've attached does not match the civil engineering plan, but will give you an idea of what is being imagined.

Keyword: Design 3D

Price: $35.0

2D Design Engineering & Architecture Autodesk AutoCAD Drafting CAD